Casio IT-2000W Belgian, Brazilia, British, Canadian, Danish, Dutch, Finnish, Frenchc, German

Keyboard=Setting	Specifies the keyboard to be used. From the Setting column of the table
	shown below select a value to be placed on the right side of the equation.
	Country Kind	Setting	Country Kind	Setting
	Belgian	BELGIAN	Brazilian	BRAZILIA
	British	BRITISH	Canadian Multilingual	CANADIAN
	Danish	DANISH	Dutch	DUTCH
	Finnish	FINNISH	French	FRENCH
	French Canadian	FRENCHC	German	GERMAN
	Icelandic	ICELANDI	Italian	ITALIAN
	Latin American	LATINA	Norwegian	NORWEGIA
	Portuguese	PORTUGUE	Spanish	SPANISH
	Swedish	SWEDISH	Swiss French	SWISSF
	Swiss German	SWISSG	US	US
	US-Dvorak	US-DVO	US-International	US-INT
[Update] section	This section will be referenced from the [Setup] section if
	"UpdateDrivers=yes" is specified.
UpdateSysCall=	If set to "yes", SYSCALL.DLL is copied in the WINDOWS directory. The
yes or no	objective SYSCALL.DLL to be copied must be located in the same
	directory as WINST.EXE.
UpdateVKD=	If set to "yes", VKD.386 is copied in the WINDOWS directory then
yes or no	registered in SYSTEM.INI. The objective VKD.386 to be copied must be
	located in the same directory as WINST.EXE.
UpdatePenMouse	If set to "yes", PENMOUSE.DRV is copied in the WINDOWS directory
=yes or no	then registered in SYSTEM.INI. The objective PENMOUSE.DRV to be
	copied must be located in the same directory as WINST.EXE.
UseKeyPad=	If the application program uses the keypad library, it must be set to "yes".
yes or no	If set to "yes", PADCTRL.VBX is copied in the WINDOWS directory.
	The objective PADCTRL.VBX to be copied must be located in the same
	directory as WINST.EXE.
UseOBR=	If the application program uses the OBR library, it must be set to "yes". If set
yes or no	to "yes", OBRLIB.DLL is copied in the WINDOWS directory. The objective
	OBRLIB.DLL to be copied must be located in the same directory as
	WINST.EXE.
UseIrDA=	If the application program uses the IrDA communication library or FLINK
yes or no	library, it must be set to "yes". If set to "yes", both IRDA.DLL and
	IRCOMM.DRV are copied in the WINDOWS directory then registered in
	SYSTEM.INI and WIN.INI. The objective IRDA.DLL and IRCOMM.DRV
	to be copied must be located in the same directory as WINST.EXE.
UseYMODEM=	If the application program uses the YMODEM library, it must be set to "yes"
yes or no	If set to "yes", YMODEM.DLL is copied in the WINDOWS directory. The
	objective YMODEM.DLL to be copied must be located in the same directory
	as WINST.EXE.
UseFLINK=	If the application program uses the FLINK library, it must be set to "yes". If
yes or no	set to "yes", FLINK.DLL is copied in the WINDOWS directory. The objective
	FLINK.DLL to be copied must be located in the same directory as WINS.EXE.
IrDA.COM2	This section is used to specify the contents to be set in WIN.INI if
	UserIrDA=yes.
	For information about each setup value refer to Chapter 7.9, "COM Driver
	for IrDA"

287