Casio IT-2000W manual Installation Method

7.9.4Installation Method

The method used to install the IrDA driver in Windows is described here. Using WINST.EXE it is also possible to install it according to the default settings. Use the following information as a reference for manual installation or if modifying the setup contents.

The Windows3.1 IrDA driver is installed with the following procedure. Assume that this installation is made in the Windows system, and that installation is made from the card drive (G:) in ￿D:￿WINDOWS.

￿Copy IRDA.DLL and IRCOMM.DRV into D:￿WINDOWS or D:￿WINDOWS￿SYSTEM.

>COPY G: IRDA.DLL D:￿WINDOWS

>COPY G:￿IRCOMM.DRV D:￿WINDOWS

￿Copy COMM.DRV into the MASK ROM drive into D:￿WINDOWS, then rename it.

>COPY E:￿WINDOWS￿COMM.DRV D: ￿WINDOWS￿RSCOMM.DRV

Modify the contents of the SYSTEM.INI file as follows:

Modify the following settings in the “boot” section. (Before modification)

comm.drv=comm.drv

(After modification)

comm.drv=ircomm.drv

Add the following section to the end of the file.

[Ircomm.drv]

comm=RSCOMM.DRV

IrDA=IRDA.DLL

139