Casio IT-2000W manual System Menu, Overview

3.System Menu

3.1Overview

The system menu is a program and used to perform various setups (system clock, contrast of liquid crystal display, etc.) and implement (downloading) application programs, all of which are necessary to use this terminal.

To start up the system menu press the reset switch located at the back of the main unit. When the reset switch is released a short beep will sound and, after a short while, a screen as shown in Fig. 3.1 will appear.

The calibration (touch panel adjustment) program is initiated first and it must be executed before entering to the system menu selection stage. If this terminal is used for the first time or if the touch screen is out of line, adjust the touch panel using this calibration program.

(For information about adjusting the touch panel refer to Chapter 3.9 “Touch Panel Calibration”) If the “ 1” key is pressed the system menu will be initiated as shown in Fig. 3.2.

Fig. 3.1 Fig. 3.2

52