Casio IT-2000W manual Basic Operation, List of Functions

3.2Basic Operation

In the system menu a common set of key operations are used. The following list shows the

keys that can be used in the system menu.

Current Condition	Key Operation	Operation Process
Line cursor is on	8	Moves the line selection cursor up one line.
	2	Moves the line selection cursor down one line.
	CLR	Moves the line selection cursor to the upper
		menu area, if it is located in the lower menu area.
	RET	Confirms and executes the currently selected
		menu item.
Others	0 to 9	Selection of an item or entry of a numeric value.
	RET	Confirms the currently selected execution item.
	CLR	Cancels the currently selected execution item.

If "FILE TRANSFER" or "MAINTENANCE" is selected for the first time after the system menu is initiated, the operator is required to enter a password for system security purposes. For information about password entry refer to Chapter 3.17 “Password Entry".

3.3List of Functions

Command Screen		Description
SYSTEM SETUP	Key Click Sound	Switch ON or OFF the key click sound.
	Buzzer Volume	Set volume of buzzer.
	LCD Contrast	Adjust the brightness of contrast.
	Auto Backlight	Set the control of auto backlight.
	Auto Power OFF	Set auto power off.
	Calibration	Adjust the calibration on touch panel.
FILE TRANSFER	Ymodem Batch	Start up the YMODEM utility.
(requires password)	FLINK (IrDA)	Start up the FLINK utility.
MAINTENANCE	Set Date/Time	Set date and time.
(requires password)	MS-DOS Command	Set the command entry mode.
	RAM Disk Size	Change the size of RAM DISK.
	Format Disk	Format on user disk.
	Default Setting	Start up the system initialization.
EXIT (power off)

For information about each function in the list above refer to the following pages.

53