Casio IT-2000W manual LED on, CODE39 C/D

	NW-7 start/stop code
		Transfer	[	Yes
		Not transfer	{	--
	Change codes to uppercase characters		q	Yes
	Change codes to lowercase characters		r	--
	Enable transfer of ABC code		j	--
	Disable transfer of ABC code		k	Yes
	C/D (CODE39/NW-7/2of5/CODE11)
		Disable check	R	Yes
	Enable transfer of check		S	--
	Disable transfer of check		T	--
	Readout CODE ID	Not transfer	P	Yes
		Transfer	Q	--
5.	Enable buzzer/LED ON after normal read		J	Yes
Specify	Disable buzzer/LED ON after normal read		K	--
buzzer	Enable buzzer/LED ON for one time		L	--
activation and	LED OFF when command awakes from sleep		s	Yes
LED ON		mode
	LED ON when command awakes from sleep mode		t	--
modes
6.	Output enable		M	--
Specify output	Output disable		N	Yes
of BEL when
the code can
not be
decoded
7.	Scanning enable		H	Yes
Specify	Scanning disable		I	--
scanning mode	Special mode
	Scanning disable after one normal read		U	--
8.	Request sleep mode		o	--
Specify	Request stop mode		p	--
sleep
mode/stop
mode
9.	Write defaults		Y	--
Write to	Write current setting values		y	--
EEPROM
10.	Switch to the setting values currently		O	--
Modify		stored in EEPROM
settings
11.	Expanded command control
Expanded		Transmission start	u	--
commands	￿	Transmission complete	v	--
	CODE39 C/D
	Disable check (without changing the transfer		A	--
		function)	B	--
		Enable check/Transfer
	Enable check/Not transfer		C	--
	Disable check/Not transfer		Y	--
		Disable check/Transfer	Z	Yes

226