Casio IT-2000W manual ClearCommBreak

ClearCommBreak

int ClearCommBreak (idComDev)

int idComDev; /* Device with canceled break state */

The ClearCommBreak function cancels the break state of the communication device and restores it so it is ready for character transmission.

<Parameter >

idComDev: Identifies the communication device for which the break state is to be canceled. The OpenComm function will return this value.

<Return value >

Returns zero if the function is terminated normally. If an valid device was not identified by idComDev parameter, -1 is returned.

Note:

The function cancels the break state of the communication device that was set with the SetCommState function.

Note on IrDA:

This will only function if the 9-Wire or 3-Wire connection is established. It will not function for 3-Wire RAW connection. If this is attempted, the ClearCommBreak function will be terminated normally.

111