Casio IT-2000W manual Operation at Menu Startup, Outline of WINST.EXE Operations, Clr Esc

Operation at Menu Startup

WINST.EXE can run either on the IT-2000 or on a personal computer. However, since the IT-2000 is not provided with an arrow key to move the bar-type cursor, use the following key operations.

	IT-2000	PC
Move cursor up	"8"	"8" or Up arrow
Move cursor down	"2"	"2" or Down arrow
Accept	ENTER	ENTER
Cancel	CLR	ESC

Outline of WINST.EXE Operations

Basically, WINST.EXE will perform the following tasks. Not all of the tasks are always executed but information about each task is specified by WINST.INF.

Copies a file in E:WINDOWS￿LOCAL to D:￿WINDOWS.

Correct the contents of the Sytem.INI or Win.INI file according to the language, country code, and keyboard type to be used.

￿Copies the drivers to be used and registers them in SYSTEM.INI and WIN.INI. Copies the libraries (DLL/VBX) to be used.

The target directory of installation in the above described processes differs depending on the execution environment of WINST.EXE. For example, if WINST.EXE is executed on the IT-2000, SYSTEM.INI, which is to be modified, must be in the D:￿WINDOWS directory. However, if WINST.EXE is executed on a personal computer, the SYSTEM.INI file in the WINDOWS directory under the current directory will be modified.

The following table shows the difference of the processed contents depending on whether WINST.EXE was executed on the IT-2000 or on the personal computer.

	IT-2000	PC
WINST.INF to be used	Same directory as WINST.EXE
Target of installation	D:￿WINDOWS	WINDOWS under current
		directory
Copying of LOCAL	From E:￿WINDOWS￿LOCAL	Not copied
directory	￿
	To D: WINDOWS
Copy source of drivers	Same directory as WINST.EXE
INI file to be modified	D: WINDOWS SYSTEM.INI	￿WINDOWS SYSTEM.IN
	D:￿WINDOWS￿WIN.INI	WINDOWS￿WIN.INI

285