Acquisition of OFF Reason

Acquires the reason that the system was most recently turned OFF.

SYNTAX

int SYS_GetPowerOffFactor();

INPUT

 

None

 

OUTPUT

 

b0

Power key

b1

Reset switch

b2

Reserved

b3

LBO

b4,b6, b7

Reserved

b5

LB1 timeout (indicates “OFF” by the condition of battery voltage low.)

b8

APO

b9

Software-triggered OFF

b10 to b15

Reserved

Note:

If the reset switch is pressed the system menu is initiated. This means that an application program will never acquire the status of "Reset switch being pressed" as the reboot reason. If the system is rebooted, the reason it was set OFF will be cleared. Therefore, zero will be

￿acquired if the reason it was set OFF is read for the first time after rebooting.

If "Cancellation of the next resume process" is set as the reason the power was set OFF (including Power key, APO, Software-triggered OFF, etc.), the reason it was set OFF will be cleared during the reboot process.

183

Page 183
Image 183
Casio IT-2000W manual Acquisition of OFF Reason, Int SYSGetPowerOffFactor, Lbo