Casio IT-2000W manual Other parameters, File name

Other parameters

Specify the options immediately after (without inserting a space) the command. Options must be specified in the following order:

/N	Suppression of message display
	Specify this option if a copyright message or error message is suppressed from being
	outputted.
/BN	Specification of a baud rate (If omitted, 2 (9600 bps) is employed.)
	N =	0:	2,400 bps
		1:	4,800 bps
		2:	9,600 bps
		3:	19,200 bps
		4:	23,040 bps
		5:	28,800 bps
		6:	38,400 bps
		7:	57,600 bps
		8:	115,200 bps

/P	For file transmission via YMODEM protocol this option sets a pathname on the
	destination side from the pathname of the object file that exists on the transmission
	source. This file name must be specified by its full pathname.
/PXXX Modifies the pathname of a file to be transmitted via YMODEM protocol.
	XXX= path (maximum 250 characters)
/U	With this option if a wild card is used for a file name to be transmitted via YMODEM
	protocol, files included in the sub-directory can be the objectives of file transmission.
	This option is also used to mirror-copy a drive.

File name

XMODEM: Transmission (/SX) : Specify only one file.

Reception (/RX) : Specify one file name.

*Multiple files cannot be used.

*Wild cards cannot be specified.

YMODEM: Transmission (/SY) : Specify file names. Multiple files can be specified as a lump.

If specifying multiple files, separate each of them using a space. Wild cards

(*, ?) can be used.
Reception (/RY)	: File name is invalid.

280