Example of specifications of storage destination directory name

Specification of root directory

D:

 

Specification of sub-directory

D:

TEST￿BIN￿

Incorrect specification

D:￿TEST

Note:

If the host (reception) side has a file with the identical name, this command will forcibly overwrite

that file. However, this overwrite operation is not unconditional. This command first creates a

temporary file on the disk of the host, then it overwrites the file after the transmission has been

completed. This is a safety measure to protect the original file from, for example, a file transmission

failure. Accordingly, if the host side has a file with the identical name, there must be enough space

on the disk to store the host-side transmission file. If there may not be sufficient disk space, files on

the host side should be deleted in advance or the file delete command (described on page 249) on

the transmission side should be used to delete files on the host side.

Example of specifications

FLINK /S A:￿TEST￿*.DAT

This specification transfers all files that are in "A: TEST" of the

D: TEST2

terminal and that have a "DAT" extension to "D:￿TEST2￿" on

 

the host.

FLINK /SR A:￿TEST￿*.DAT

This specification transfers all files that are in "A:￿TEST"

D:￿TEST2￿

(including sub-directories) of the terminal and that have a "DAT"

 

extension to "D:￿TEST2￿" on the host.

268

Page 268
Image 268
Casio IT-2000W manual Example of specifications, Dtest