IrDA Environment Setup Commands

Wait Time Setup (/L)

Function

This function sets up the Wait time for communication.

Starting method

int

argc = Number of parameter arguments

char*

argv[] = { "fl", "/L={, wait time for connection establishment, wait time for data

 

reception/transmission,,,,}" }

DoFlink(argc, argv)

If the parameters for the L option do not have to be entered, enter only comma separators. If this is the case, default values will be automatically used.

Wait time for connection establishment

Specify 0 to 3600 (second)

￿If 0 is specified, the process takes until connection establishment. The default value is 1800 seconds.

Wait time for data reception/transmission

Specify 0 to 3600 (second)

￿If 0 is specified, the process takes until the end (normal end or abnormal end). The default value is 300 seconds.

Parameter setup examples

argc = 2

argv[] = { “fl” , “/L={,20,,,,,}” }

Following the parameter setting shown above as example, the environment setting can be done according to the details listed in the table below.

Parameter

Process value

Remark

Wait time for connection establishment

20 sec.

 

Wait time for data transmission/reception

300 sec.

Default

252

Page 252
Image 252
Casio IT-2000W manual IrDA Environment Setup Commands Wait Time Setup /L, Wait time for connection establishment