OPERATION AFTER TAPE END DETECTION
The VCR can be programmed to respond differently when the tape reaches its end. The following describes how to set the different modes of operation.
How to Set to Stop at End of Tape
INTRODUCTION
Press the DISPLAY
1 button.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
M E N U
CLOCK ADJUST SETUP DISPLAY MODE PROGRAM ALARM RECALL TIME DATE SEARCH
END=[DISPLAY]
Press the + or – SET
4 button to set the opera- tion after tape end detection.
DISPLAY – TIME MODE +
SET |
|
SHIFT | TRACKING |
| |
| LOCATION SELECT |
S E T U P |
|
|
ALARM REC TIME | 15S | |
SPEED | A 2H | |
1SHOT REC FIELD | 1F | |
INTERVAL | 0.2S | |
RESTART REC | OFF | |
TAPE END MODE | STOP |
|
ALARM | STOP | |
MENU=[DISPLAY]
PREPARATION
Press the 
or 
2 SHIFT button to blink
SETUP and press the + SET button.
DISPLAY | – TIME MODE + |
| SET |
M E N U
CLOCK ADJUST
SETUP DISPLAY MODE PROGRAM ALARM RECALL
iEach time the + SET button is pressed, the display
changes as follows.
STOP → (REW → STOP) → (REW → REC)
iEach time the – SET button is pressed, the display changes in the reverse order.
SHIFT
TRACKING
TIME DATE SEARCH
LOCATION SELECT
END=[DISPLAY]
Display | Operation after detection of tape end |
STOP | Stops at tape end. |
Press the 
or 
3 SHIFT button to blink
TAPE END MODE.
DISPLAY – TIME MODE +
SET
SHIFT | TRACKING |
| |
| LOCATION SELECT |
S E T U P |
|
|
ALARM REC TIME | 15S | |
SPEED | A 2H | |
1SHOT REC FIELD | 1F | |
INTERVAL | 0.2S | |
RESTART REC | OFF | |
TAPE END MODE | STOP |
|
ALARM | STOP | |
MENU=[DISPLAY]
REW → STOP Rewinds to beginning of tape and stops. | ||
|
| |
REW → REC | Set to carry out repeat recording. | |
Rewinds to beginning of tape and records. | ||
| ||
Caution:
If you need Auto Rewind function even for the case that alarm recording starts during recording, please set TAPE END ALARM to “CONT.” in the MENU SCREEN.
Note:
iThe buzzer, screen display and counter displays operate as follows depending on the setting for operations after tape end detection.
Setting contents | Buzzer | Screen display | Counter display |
STOP | Buzzer sounds at tape end | TAPE END blinks | Counter display blinks |
REW → STOP | Buzzer sounds at tape top | TAPE END blinks | Counter display blinks |
REW → REC |
|
|
|
PLAYBACK | OPERATION |
NOTICE
34
