Toshiba KV-7960A Button twice to erase, Menu screen, Press the Shift, Press the Timer button

Press the SHIFT

7 button to blink end time. Set end time to 17:00 with the SET button and

the SHIFT button in the same manner as 6.

DISPLAY – TIME MODE +

PROGRAM FR1 ON --:-- ➜ --:-- 120H FR2 ON --:-- ➜ --:-- 120H SA1 ON --:-- ➜ --:-- 120H SA2 ON --:-- ➜ --:-- 120H SU1 ON --:-- ➜ --:-- 120H SU2 ON --:-- ➜ --:-- 120H

DLY ON 8:30 ➜ --:-- 120H

MENU=[DISPLAY]

Press the DISPLAY			INTRODUCTION
button twice to erase the
9 MENU screen.
DISPLAY	– TIME MODE +
	SET
	SHIFT	TRACKING
	LOCATION SELECT		8/28/96 WED
			17:30:02 A 2

SET

SHIFT

TRACKING

LOCATION SELECT

PROGRAM FR1 ON --:--➜ --:-- 120H FR2 ON --:--➜ --:-- 120H SA1 ON --:--➜ --:-- 120H SA2 ON --:--➜ --:-- 120H SU1 ON --:--➜ --:-- 120H SU2 ON --:--➜ --:-- 120H DLY ON 8:30 ➜ 17:30 120H

MENU=[DISPLAY]

Press the SHIFT

8 button and the + SET button to set recording time mode to A24H.

DISPLAY – TIME MODE +

SET
SHIFT	TRACKING
	LOCATION SELECT

PROGRAM FR1 ON --:--➜ --:-- 120H FR2 ON --:--➜ --:-- 120H SA1 ON --:--➜ --:-- 120H SA2 ON --:--➜ --:-- 120H SU1 ON --:--➜ --:-- 120H SU2 ON --:--➜ --:-- 120H

DLY ON 8:30 ➜ 17:00 120H

MENU=[DISPLAY]

PROGRAM FR1 ON --:--➜ --:-- 120H FR2 ON --:--➜ --:-- 120H SA1 ON --:--➜ --:-- 120H SA2 ON --:--➜ --:-- 120H SU1 ON --:--➜ --:-- 120H SU2 ON --:--➜ --:-- 120H DLY ON 8:30 ➜ 17:00 120H

10 Press the TIMER button.		H	PREPARATION
TIMER	REC	SP
		TIMER
i The power goes off and the TIMER display lights in the
VCR display.			RECORDING OPERATION
i Recording starts at the programmed start time.
Notes:
i If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.			PLAYBACK OPERATION
i To cancel the timer recording, press the POWER button or
the TIMER button.
i The time difference between start time and end time
should be more than 1 minute. If they are same, timer

MENU=[DISPLAY]

iThe TIME MODE button is pressed, the display changes as follows.

120H → 168H → 240H → 480H → 720H → 960H → L01

→L02 → L03 → A2H → A6H → A12H → A18H → A24H

→24H → 48H → 72H → 120H

iThe TIME MODE button is pressed, the display changes in the reverse direction.

IF A POWER FAILURE SHOULD OCCUR

iIf a power failure occurs, the PW.FAIL display appears in the VCR display. To erase this display press one of the operations buttons.

iIf the power failure is recovered within 10 days, and the battery is charged continuously for more than 48 hours in the ambient temperature, the date/time data and timer recording programs remain in the memory.

recording doesn’t work.
i The accuracy of the time display depends on the condi-
tions of use and the environment. Set clock to the exact
time by daily check.
i During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
			NOTICE
	PROGRAM
	FR1 ON -:--- ➜ -:--- 120H
	FR2 ON -:--- ➜ -:--- 120H
	SA1 ON -:--- ➜ -:--- 120H
	SA2 ON -:--- ➜ -:--- 120H
	SU1 ON -:--- ➜ -:--- 120H
	SU2 ON -:--- ➜ -:--- 120H
	DLY ON -:--- ➜ -:--- 120H
	MENU=[DISPLAY]
		26