PREPARATIONINTRODUCTION
RECORDING | OPERATION |
|
|
PLAYBACK | OPERATION |
|
|
NOTICE
Playback
There is excessive noise in the playback picture. | i Adjust with the TRACKING button. |
The playback picture is not clear. | i The video head may be clogged or worn out. |
| Consult with your dealer. |
The | i Press the TRACKING button in a still playback mode and adjust. |
playback shakes up and down. |
|
Two recorded sections appear in the playback | i Are you using an external synchronous or |
picture when using several video cameras and | video camera? |
changing cameras. | Consult with your dealer. |
When the VCR power plug is inserted to the AC | i Is restart recording set to ON? |
outlet, recording starts and playback is not possible. |
|
|
|
Other matters
No screen display appears. | i Has DISPLAY MODE been set? |
| |
| i Is the |
| |
|
|
|
|
Recording does not continue automatically after | i Did the power failure continue for more than 10 days? |
| |
restoring power following a power failure. |
|
|
|
|
|
|
|
Black/white picture appears in playback through | i Playback is carried out with the VIDEO MODE switch set to B/W |
| |
color camera signals are recorded. | position. | ||
| i Recording is carried out with the VIDEO MODE switch set to B/W | ||
| position. | ||
|
| ||
Pictures are colored in playback through black/ | i Playback is carried out with the VIDEO MODE switch set to COLOR | ||
white camera signals are recorded. | position. | ||
| i Recording is carried out with the VIDEO MODE switch set to | ||
| COLOR position. | ||
|
|
|
|
Cautions:
iDo not install the VCR in a location near heat sources, such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibrations or impacts.
iAllow adequate air circulation to prevent internal heat
iKeep the VCR and the video cassettes away from strong magnetic fields.
iTo disconnect the lead, pull it out by the plug. Never pull the lead itself.
iDo not drop any inflammable or metallic objects, or liquid into the VCR. This may cause damage to the VCR.
iDo not hit or shake the VCR when moving it. This may cause damage.
iRemove the cassette from the VCR when not in use.
iSave the original carton and packing materials: they will come in handy if you ever have to transport your VCR. For maximum protections, repack the VCR as it was originally packed at the factory.
iDo not use volatile liquids such as insect spray near the VCR.
Do not leave rubber or plastic products touching the VCR for a long time. They will damage the finish.
Notes:
iWhen the TIME MODE is changed during recording, noises will occur for an instant on the screen and sound at that the TIME MODE changed area in the playback.
iWhen the TIME MODE is changed during playback, noises will occur for an instant on the screen and sound.
iIn the cases shown below, the VCR sets the power on first for 1 ~ 2 s, and turns the power to off with display “OFF”.
•When the ALL clear button is pressed.
•When the power cord plug is connected after disconnected during the VCR display “OFF”.
•When the power supply is resumed from power failure during the VCR display “OFF”.
49
