INTRODUCTION
PREPARATION
INSTRUCTIONS IN BRIEF
Front Panel
2 | 3 | 4 | 6 | 7 | 12 |
| 13 | 14 | 16 |
| 18 | 19 | 21 |
| 22 |
REC CHECK TIMER | REC | VIDEO MODE |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| AUTO COLOR | B/W |
|
|
|
|
|
|
|
| PAUSE/STILL |
| |
|
|
| REMOTE |
|
| TIME LAPSE VCR |
|
|
|
|
|
|
|
| |
POWER |
| EJECT | OFF REMOTE OPTION |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| PLAY | STOP | REV | FWD | |||
|
|
| BUZZER |
|
|
| 4Head 960 hour |
|
|
|
|
|
|
|
|
|
|
| ON OFF |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| TAPE REMAIN |
|
| DISPLAY | – TIME MODE + |
|
|
|
|
| ||
|
|
|
|
| COUNTER |
|
|
|
| SET |
|
|
|
|
|
|
|
|
|
|
|
|
|
| SHIFT | TRACKING |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| MEMORY | ALARM | RESET |
|
|
| LOCATION SELECT |
|
|
| ||
1 |
| 5 | 8 | 9 | 10 | 11 | VCR DISPLAY |
| 15 |
|
| 17 | 20 |
|
|
RECORDING | OPERATION |
|
|
PLAYBACK | OPERATION |
|
|
NOTICE
1POWER button
Press to turn the power ON and OFF.
2REC CHECK button
Press this button while in record mode to check the picture that was just recorded. After an approximate 2 second playback the VCR automatically goes back into record mode.
3TIMER button
Press this button to set the VCR in timer recording mode.
4REC button
Press to set the VCR in record mode.
5EJECT button
Press to eject the cassette automatically from the cassette compartment.
6VIDEO MODE switch
In the event of a weak color signal or insufficient S/N ratio, set this switch to the appropriate setting (color or B/W).
AUTO : Automatically switches the circuit according to the input signal or playback signal.
COLOR : Forcibly switches the circuit to color mode.
B / W : Forcibly switches the circuit to black and white mode.
Note:
Regardless of what position the VIDEO MODE switch is in, the EE output signal is the same as the input signal.
7REMOTE switch (mode lock)
OFF | : | Set for normal operation. |
REMOTE | : | Set for use with optional module connected |
|
| onto rear panel. This will lock the front |
|
| panel. Set switch to this position for mode |
|
| lock. |
OPTION : Set for external operations when you use an option module connected onto rear panel. When switch is set to this position, the front panel will be operationally limited. (See the Instruction Manual supplied with the optional module.)
8BUZZER switch
This is the on/off switch for the buzzer. The buzzer sounds continually when dew condensation is detected, when the VCR starts alarm recording, and when recording reaches to tape end. The buzzer beeps five times with a record- protected cassette being inserted when REC button or TIMER button is pressed.
The buzzer sound may be cancelled by setting this switch off.
9COUNTER MEMORY button
•Press once to set “COUNT. M” (counter memory) on the VCR DISPLAY. The tape stops at a count of “0000” in
•Press twice to set “ALARM M” (alarm memory) on the VCR DISPLAY. The tape stops automatically at the first alarm event detected in
•Press three times to cancel this function.
pCOUNTER ALARM button
Press to display the tape counter or the alarm counter on the VCR DISPLAY.
qCOUNTER RESET button
•Press to reset the tape counter to “0000” while in the tape counter mode.
•Press to reset the alarm counter to
5
