Universal Remote Control THZ-100 owner manual Selecting the Auto Changeover Mode

THZ-100 THERMOSTAT

Selecting the Auto Changeover Mode

If you desire for your HVAC system equipment to automatically switch between the cooling and heating modes as needed to maintain the desired comfort level in your home, use the arrow keys to move the highlight bar to Auto.

Press the key below the OK key label in the smart-key label at the bottom right of the display to select this new mode. If you decide to cancel the operation then press the key below the Cancel key label in the smart-key label at the bottom left of the display.

If the Climate Modes screen times out and goes back to the main screen without pressing the OK button, no change is made to the climate mode.

In Auto mode, the thermostat activates the system equipment to cool or heat your home per the programmed schedule or hold temperature. The system automatically changes between cooling and heating as needed.

Page 25