Universal Remote Control THZ-100 owner manual How To Set The Heating 2nd Stage Offset

THZ-100 THERMOSTAT

How To Set The Heating 2nd Stage Offset

If you desire to change the heating 2nd stage Offset temperature then use the arrow keys to move the highlight bar to Heating (2nd Stage Offset). If you do not have a multi-stage heating system then the Heating (2nd Stage Offset) feature is not displayed in the menu list.

Press the key below the OK key label in the smart-key label at the bottom right of the display to select this option. If you decide to cancel the operation then press the key below the Cancel key label in the smart-key label at the bottom left of the display.

After pressing OK the screen updates to a screen that says Heating 2nd Stage Offset at the top of the screen and the current offset temperature in the center of the screen. Use the arrow keys to adjust the temperature up or down to the value you desire.

Press the key below the Set Temp key label in the smart-key label at the bottom right of the display to save your new offset value. If you decide to cancel the operation then press the key below the Cancel key label in the smart-key label at the bottom left of the display.

The initial value is established when the thermostat is initially setup through the MRX Advanced Network System Controller.

Page 31