Universal Remote Control THZ-100 owner manual Accessing Temperature Sensor Information

THZ-100 THERMOSTAT

Accessing Temperature Sensor Information

If you desire to view the status of all temperature sensors used in your system then use the arrow keys to move the highlight bar to Sensors.

Press the key below the OK key label in the smart-key label at the bottom right of the display to select this new information screen. If you decide to cancel the operation then press the key below the Go Back key label in the smart-key label at the bottom left of the display.

If you select OK then the display changes to a list of temperature sensors used in your system. The first list entry is the thermostat’s onboard sensor. The right side of the screen shows the current reading for that sensor.

The second list entry is any wired sensor in the system. The name of the sensor is displayed with the current reading to the right. If there is no wired sensor in your system then this line is not displayed.

The last list entry is any local temperature information accessed from the internet. The name of the sensor is displayed with the current reading to the right. If there is no internet temperature available to your system then this line is not displayed.

Page 28