How To Set The Cooling 2nd Stage Offset
If you desire to change the cooling 2nd stage Offset temperature then use the arrow keys to move the highlight bar to Cooling (2nd Stage Offset). If you do not have a
Press the key below the OK key label in the
After pressing OK the screen updates to a screen that says Cooling 2nd Stage Offset at the top of the screen and the current offset temperature in the center of the screen. Use the arrow keys to adjust the temperature up or down to the value you desire.
Press the key below the Set Temp key label in the
The initial value is setup when the thermostat is initially setup through the MRX Advanced Network System Controller. The default value is 50F or 2.50C.
Page 32