Universal Remote Control URC-300 owner manual E C u s t o m i z e r Learning Method

T h e C u s t o m i z e r

Learning Method

The Customizer can learn commands from your old remote controls one-button-at-a-time by following these simple steps:

1Line-up the Customizer with your old remote control, head-to-head, one or two inches apart.

2Press and hold the MAIN and ENT (Enter) buttons at the same time for approximately three seconds. The top of the display will show “SETUP”. You are in SETUP mode now.

Note: You have 30 seconds to perform a step while you are in SETUP mode. If you don’t press a button within that time, the Customizer will time out and return to normal operation.

3Press the LEARN button.

LEARN

Button

The top of the screen will change to “LEARN”.

10