T h e C u s t o m i z e r
7
8
Press and hold the button on your old remote control until the display changes to “RETRY”.
Press and hold the same button on your old remote control once again.
The Customizer’s unique DoubleTap learning technology ensures compatibility with the widest variety of remote controls ever!
9Once you have taught the button twice, the display will change to either “GOOD” or “FAILED”.
If the “GOOD” label appears on top of the display and “SAVED” flashes on the bottom, you were successful. Now, press the next button you wish to teach. Keep repeating steps 6 through 9 until you have learned all the buttons you want.
If the “FAILED” label appears on top of the display, try to teach the same button in Customizer once again by repeating steps
Continue to teach any commands from any of your
10remote controls by repeating steps
Once you completed teaching all the buttons, return
11to normal operation by pressing the MAIN button twice. Test all your new commands. If any of them don’t work, try learning again using these notes:
Move to another room. Plasma TVs, sunlight, halogen or quartz lighting can interfere with the learning process. Although the old remote control seems to work fine, change the batteries to fresh alkaline batteries.
Vary the distance between the remote controls gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.
Tap the button on the original remote control instead of pressing and holding it during the learning process.
12
