U R C - 3 0 0
6In this step you verify the type of component you plan to operate with this device button. If the flashing name is correct, press SELECT.
SELECT
If the name flashing in the display is incorrect (for example, you are setting up AUX to operate a second DVD player), use the UP and DOWN buttons to change the flashing name to the correct type of component.
Note: Each name that appears in the display may include several types of components. For example, the AUX category includes video processors, subwoofers, and even remote controlled pianos. See page 33 for a list of component types each Code Table contains.
7Point the Customizer at the component, then enter the first three digit code number from your notes using the numbered buttons. After you enter each three digit number, look at the component to see if it turned off.
Use the number buttons to enter the code number.
Continue to enter code numbers until the component powers off.
For Example: I have a Sony TV. I found the code numbers 070, 139, 147, 126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered buttons on the Customizer, I entered 070 and looked at the TV. It didn’t turn off, so I entered 139, then 147 and so on, until I found the code that powered off the TV.
7
