Univex DSR470 manual Digit Code in the Tables Scanning, Turn on the TV, keys. The LED will not be

Using Your Remote

If Your Remote Control Cannot Find a Working Three-

Digit Code in the Tables (Scanning)

If you try to program your remote control using the three-digit codes, and the remote control does not work correctly, you may be able to find a code that works by using the "scanning" process.

1.Turn on the TV.

2.Press the TV key for at least three seconds or until the LED blinks.

3.The following steps explain how to "scan" through the TV codes

stored in your remote control using the		keys. The LED will not be
lit while the	keys are pressed.
- While pointing the remote control at your TV press the			arrow key to
scan upward to the next code. Use the		arrow key to return to the
previous code.
- If the transmitted code is the correct one, your TV will turn off,
responding as if its POWER key were pressed.
- If your TV does not respond, press the		arrow key to try the next
code. When your TV turns on or off as a result of the transmitted code,
you will know that you have found the correct code.

- When youLhave found the correct codeL$#(power to your TV#is toggled on or off), press the ENTER key. This will store the manufacturer’s code. The LED will then flash rapidly several times and turn off.

NOTE: If your TV is not listed in the tables and/or the codes for your brand are not accepted by the remote, you will need to use the remote originally manufactured for your unit.

DSR470 User Guide 25