BEFORE USING

DISPLAY INDICATORS

Etiquette

Phone will vibrate when call is received.

Schedule

When the Schedule is set, the idle screen appears. The idle screen disappears if the schedule expires or is disabled.

Alarm

When the Alarm is set, the idle screen appears. The idle screen disappears if the alarm is in operation or disabled.

Ring Mode

Appears when a ringer is set for the ringer mode.

Dormant

Indicates your phone is in a dormant state during a data call. Your phone lapses into Dormant mode when you have not had any activity on a page for some time - your connection is still active and you can make and receive calls.

Data Only

Phone is ready to receive a data call.

GPS Icon

Indicates the Location Service of your phone is disabled/enabled.

1X

Phone is in the 1x service area.

Scratch Pad

Displays when scratch pad is in use during a call.

UP Browser

UP Browser is in use.

Web Message Icon

Phone has Web Alert message. (Web

Message + TEXT Message + Voice Message)

BATTERY USAGE

BEFORE USING

BATTERY INSTALLATION

As shown in the picture below, put the metal locators of the battery into the holes located in the bottom of the unit.

Place the battery on the back of the handset and slide into place.

Push the battery down until it locks into place.

BATTERY REMOVAL

Pull up the release latch, lift up the battery.

Remove the battery from the handset.

If the battery is not correctly placed in the compartment, the handset will not turn on and/or the battery may detach during use.

12

13

Page 8
Image 8
UTStarcom CDM8915 manual Battery Installation, Battery Removal