Getting Started

1.5.2 Charging the Battery

Connect the charger to a standard 100~240V AC wall outlet.

!LED Off: Battery not attached to phone

!LED Blinking fast (500msec): Battery problem. The battery temperature is abnormal.

!LED Blinking slow (1sec on, 3 sec off): Battery is charging.

!Service Light: Charging completed

!Note: In case of a sudden electric power interruption, the travel charger may not function properly. If this occurs, disconnect the travel charger from the wall outlet, and try charging again after 5 seconds.

1.5.3 Battery Level Indicator

You can monitor the battery status by checking the battery level indicator. The number of blocks indicates the battery’s condition as follows:

Full charge

Low charge

Flashing indicates discharged

1.5.4 Power Management

Battery

Mode

Talk Time

Standby Time

Lithium Ion

Digital

160~210 min

45~140 Hours

800 mAh

Analog

70~90 min

11~13 Hours

The criteria of measurement are in accordance with our internal specifications.

These operating times are for a new battery. Approximate values may vary depending on network configuration, signal strength and handset usage.

11

Page 19
Image 19
UTStarcom Handset warranty Charging the Battery, Battery Level Indicator, Power Management