Basic Operations
2. BASIC OPERATIONS
2.1 Turning the Phone On/Off
To turn the phone on/off, press and hold 
for approximately 3 seconds.
2.2 Making a Call
1.In idle mode, enter the phone number with the area code. (A maximum of 32 digits can be displayed.)
2.To make a call, press 
.
!To correct a number:
To clear the last digit, press 
.
To erase all the digits entered, press and hold 
.
!If the call fails to go through:
Press 
twice to redial the number.
2.3 Ending a Call
If you wish to cancel or disconnect a call, press 
or close the flip.
2.4 Last Number Redial
1.To display the outgoing call list, press 
.
2.Highlight an entry then press 
.
2.5 Speed Dialing
If you know the speed dial location of the telephone number that you want to call, enter the one, two or three digits of your phonebook address and hold down the last digit. (1 to 9, 10 to 99 or 100 to 500)
!Note: If two telephone numbers are stored in the address, the Primary Number will be dialed.
12
