Vanguard Heating FB32NCA, FB32CA Product, Specifications, Operation, Continued, Blower Accessory

PRODUCT				PRODUCT FEATURES
SPECIFICATIONS			OPERATION
	Continued
			This firebox is designed for use with approved
	Standoffs (Models FB32NCA		ANSI Z21.1.2 decorative type unvented room
			heaters. (Physical size limitations apply. Refer to
	and NLFB32NC only)
			minimum firebox requirements supplied with log
23/4"
			heater.) It requires no outside venting or chimney
11/2"			making installation easy and inexpensive. When
			used without the blower (models FB32CA and
6"			NLFB32C only), the firebox requires no electricity
			making it ideal for emergency backup heat.
			BLOWER ACCESSORY
3311/16"			The FB32CA and NLFB32C firebox will accept
			the GA3700 accessory. The variable blower allows
323/16"
			you to select the fan speed you desire. The blower
			circulates heated air from the firebox into the room.
	121/2"		Use of blower is optional.
	93/4"
		45/8"		LOCATING FIREBOX
			Plan where you will install the firebox. This will
		21/2	save time and money later when you install the fire-
			box. Before installation, consider the following:
Electrical	Electrical		1.	Where the firebox will be located. Allow for
Access Hole	Access Hole	Gas Line		wall and ceiling clearances (see Installation
				Clearances, page 9).
	with Bushing	Access
			2.	Everything needed to complete installation.
Figure 2 - Firebox Side View
			3.	These models CANNOT be installed in a
	221/2"			bedroom or bathroom.
			4.	Proper air for combustion and ventilation (see
				page 6).

	1	1611/16"								131/4"* 141/4"*
19		/4"
							315/8"
								343/8"
						355/8"
*Note:			14	1	/4" is total firebox cavity depth
including brick liner. 13									1	/4" is depth of flat
floor including brick liner.
			Figure 3 -			Firebox Top View

105604-01H www.desatech.com 5