Installing Remote Receiver

® SDVBN(A) AND SDVBP(A)

CAST IRON STOVE AND BURNER SYSTEM

STOVE AND

DIRECT-VENT BURNER SYSTEM INSTALLATION

Continued

INSTALLING OPTIONAL WIRELESS HAND-HELD REMOTE CONTROL ACCESSORIES - GHRC AND GHRCT SERIES

1.Open bottom door on stove body and locate the switch plate on the left of the valve bracket.

2.Unscrew switch plate (see Figure 47).

3.Disconnect wires from THTP and TH on control valve that lead to the switch (see Figure 44, page 21). Discard switch plate, screws, and nuts.

4.Install battery into receiver battery clip and connect to terminals (see Figure 48).

5.Place receiver into valve bracket and align holes (see Figure 49).

6.Use push-in fasteners included with receiver to secure to bracket.

7.Connect the wires from the receiver to the valve at TH and THTP (see Figure 44, page 21).

OFF	L
	P
	I
ON	O
ON	T

Figure 47 - Removing Switch Plate

Receiver

Terminal

Wires

Battery

Clip

9-Volt Battery

Figure 48 - Installing Battery in Receiver

OFF	I
	P
	L
ON	O
ON	T

Figure 49 - Installing Remote Receiver

Installing 9-Volt Battery in Hand- Held Remote Control Unit

1.Remove battery cover on back of re- mote control unit

2.Attach terminal wires to a 9-volt bat- tery (not included). Place battery into the battery housing.

3.Replace battery cover onto remote con- trol unit.

	Battery	Remote
	Battery	Control Unit
Terminal	Cover	Control Unit
	Cover

Wires
9-Volt
Battery

Battery Housing

Figure 50 - Installing Battery in Hand- Held Remote Control Unit

REMOVING/REPLACING GLASS DOOR

You must remove glass door to install logs, lava rock, and ember material. To remove glass door, you must first remove the front panel on stove body.

CAUTION: Do not operate this burner system with a broken glass door panel or without the glass door panel securely in place. For replacement part in- formation see Replacement Parts, page 31.

1.Remove 2 bolts from bottom of stove and one from the top of stove to remove front panel (see Figure 51).

2.Remove the screws from the 2 tabs at the top of the glass door while holding door securely keeping it from falling forward (see Figure 52).

3.Grasp door by both sides and ease it upward off of the lower bracket (see Figure 52).

4.To replace glass door, follow the above instructions in reverse.

Bolt

Stove Front Panel

Figure 51 - Removing Front Panel from Stove

Screw

Glass

Door

Figure 52 - Removing Glass Door from Burner System

105499

SDVBP(A), SDVBN(A) specifications

Vanguard Heating SDVBN(A) and SDVBP(A) are innovative heating solutions designed for residential and commercial applications, aiming to deliver unparalleled efficiency and comfort. These models showcase advanced technologies tailored to meet modern heating demands while ensuring minimal environmental impact.

One of the standout features of the Vanguard Heating SDVBN(A) and SDVBP(A) is their highly efficient heating performance. Operating with an Annual Fuel Utilization Efficiency (AFUE) rating of up to 95%, these models convert a significant portion of fuel into heat, minimizing energy waste and lowering utility costs. This efficiency translates to substantial savings for homeowners and businesses alike, making them an economically sound choice in the long run.

The SDVBN(A) and SDVBP(A) are equipped with variable-speed blower motors, allowing for precise control of airflow. This technology not only enhances comfort by maintaining consistent temperature levels throughout spaces but also contributes to reduced noise levels during operation. The quiet performance of these units is particularly appealing for residential settings, such as bedrooms and living areas.

In terms of versatility, Vanguard offers multiple configurations, allowing installers to tailor the heating system to specific requirements. Whether it’s a large open plan or a more segmented layout, the adjustable airflow and zoned heating capabilities ensure that every corner of the space is adequately warmed.

Another notable characteristic is the integrated smart technology. Both models come with advanced control systems that can be easily connected to compatible smart thermostats. This allows users to monitor and adjust heating settings remotely, providing added convenience and optimizing energy usage according to individual schedules.

Moreover, the SDVBN(A) and SDVBP(A) feature robust construction designed for durability. With high-quality materials and components, these units can withstand the rigors of daily use, ensuring reliable performance throughout their lifespan. Regular maintenance is simplified due to accessible design, empowering users or service technicians to conduct routine checks and repairs with ease.

Vanguard Heating has also incorporated safety features, including built-in sensors that monitor system performance and automatically shut down the unit in case of any malfunctions. This proactive approach provides peace of mind, knowing that the heating system is both efficient and safe.

In summary, Vanguard Heating SDVBN(A) and SDVBP(A) models embody cutting-edge technology, efficiency, and reliability in home and commercial heating solutions. Their ability to deliver comfortable, quiet, and economical heating while prioritizing safety and ease of maintenance makes them an excellent choice for any heating application.

Vanguard Heating SDVBN(A), SDVBP(A) manual Installing Remote Receiver

Models: SDVBP(A) SDVBN(A)

® SDVBN(A) AND SDVBP(A)

STOVE AND