® SDVBN(A) AND SDVBP(A)

CAST IRON STOVE AND BURNER SYSTEM

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Continued

8. Fasten each leg to stove with four (4)

M8 x 1.25 - 20mm bolts. Use a flat

washer and lock washer with each bolt.

10. Attach stove door by inserting step bolt

through door hinge pivot hole and into

threaded hole in stove body (see Figure

12 and Figure 9 on page 5). Use an ad-

justable wrench or a 12mm socket to fas-

ten step bolt. Tighten step bolt until snug.

Make sure door moves freely.

11. Install door catch bolt (M8 x 1.25-55mm

with two M8 hex nuts) into threaded hole

on stove body (see Figure 9, page 5).

Use an adjustable wrench or a 12mm

Door Claw

Door

Bolt Stop

Adjusting Nut

Catch Bolt

Tighten bolts into threaded holes on

stove body (see Figure10 and Figure 9

on page 5). Use an adjustable wrench

or a 12mm socket.

9. Fasten stove bottom to stove with four

(4) M6 x 1 - 25mm bolts. Use a flat

washer and lock washer with each bolt.

Tighten bolts into threaded holes on

stove body (see Figure 11 and Figure 9

on page 5). Use an adjustable wrench

or a 10mm socket.

Washers

Bottom Of

Bolt

Stove Unit

Leg

 

Figure 10 - Attaching Stove Legs

Washers

Bolt

Bottom Of

 

socket. The catch bolt has two hex nuts

 

attached to it (see Figure 13). The top

 

nut is a bolt stop and the bottom nut is

 

for door leveling adjustment.

12.

Check general catch bolt alignment

 

with door claw. Make final adjustment

 

and door leveling after stove is in nor-

 

mal standing position.

13.

Carefully lift stove back up on its four

 

attached legs.

14.

Set top grate into stove top.

Stove

Door

Threaded

Hole

Door

Hinge

Step

Bolt

Bolt

Stove Bottom

Shoulder

 

Figure 12 - Attaching Stove Door

Figure 13 - Catch Bolt and Door Claw Orientation

INSTALLING DIRECT-VENT BURNER SYSTEM INTO STOVE BODY

1.Carefully lift burner system and place into stove body from the rear of stove.

2.Using screws provided, attach burner system to back of stove.

Screw

Burner

System

Cast Iron

Stove Body

O

P

Figure 14 - Installing Burner System Into Cast Iron Stove Body

Stove Bottom

Stove Unit

Figure 11 - Attaching Stove Bottom

6

105499

Page 5 Page 7
Page 6
Image 6
Vanguard Heating SDVBN(A), SDVBP(A) manual Cast Iron Stove and DIRECT-VENT Burner System Assembly
Page 5 Page 7

SDVBP(A), SDVBN(A) specifications

Vanguard Heating SDVBN(A) and SDVBP(A) are innovative heating solutions designed for residential and commercial applications, aiming to deliver unparalleled efficiency and comfort. These models showcase advanced technologies tailored to meet modern heating demands while ensuring minimal environmental impact.

One of the standout features of the Vanguard Heating SDVBN(A) and SDVBP(A) is their highly efficient heating performance. Operating with an Annual Fuel Utilization Efficiency (AFUE) rating of up to 95%, these models convert a significant portion of fuel into heat, minimizing energy waste and lowering utility costs. This efficiency translates to substantial savings for homeowners and businesses alike, making them an economically sound choice in the long run.

The SDVBN(A) and SDVBP(A) are equipped with variable-speed blower motors, allowing for precise control of airflow. This technology not only enhances comfort by maintaining consistent temperature levels throughout spaces but also contributes to reduced noise levels during operation. The quiet performance of these units is particularly appealing for residential settings, such as bedrooms and living areas.

In terms of versatility, Vanguard offers multiple configurations, allowing installers to tailor the heating system to specific requirements. Whether it’s a large open plan or a more segmented layout, the adjustable airflow and zoned heating capabilities ensure that every corner of the space is adequately warmed.

Another notable characteristic is the integrated smart technology. Both models come with advanced control systems that can be easily connected to compatible smart thermostats. This allows users to monitor and adjust heating settings remotely, providing added convenience and optimizing energy usage according to individual schedules.

Moreover, the SDVBN(A) and SDVBP(A) feature robust construction designed for durability. With high-quality materials and components, these units can withstand the rigors of daily use, ensuring reliable performance throughout their lifespan. Regular maintenance is simplified due to accessible design, empowering users or service technicians to conduct routine checks and repairs with ease.

Vanguard Heating has also incorporated safety features, including built-in sensors that monitor system performance and automatically shut down the unit in case of any malfunctions. This proactive approach provides peace of mind, knowing that the heating system is both efficient and safe.

In summary, Vanguard Heating SDVBN(A) and SDVBP(A) models embody cutting-edge technology, efficiency, and reliability in home and commercial heating solutions. Their ability to deliver comfortable, quiet, and economical heating while prioritizing safety and ease of maintenance makes them an excellent choice for any heating application.
Top Page Image Contents