Vanguard Heating SDVBP(A), SDVBN(A) manual Stove Body Assembly

OWNER’S MANUAL

PRE-INSTALLATION	CAST IRON STOVE
PREPARATION	AND DIRECT-VENT
Continued	BURNER SYSTEM
	ASSEMBLY

6.	Carefully lay stove body on back to attach
	bottom components to stove body (see
	Figure 7). Rest stove on drop cloth or blan-
	ket to avoid scratching stove edges.
7.	Remove remaining pallet wood at-
	tached to bottom of stove body (see
	Figure 8). Use an adjustable wrench to

4" 4"

Figure 4 - Clearance for Corner Installation

26 1/4"

Front

26 1/8"

Figure 5 - Stove With Burner System Bottom Dimensions

STOVE BODY ASSEMBLY

1.Lift off corrugated box enclosing stove body crating.

2.Remove all screws fastening the wood frame enclosure. Spread wood frame open and lift away from plastic-bagged stove body. The bottom pieces of pallet wood will remain bolted to the stove body.

3.Remove plastic bag from stove body.

4.Remove back panel from stove (see Figure 6). Use an adjustable wrench or a 10 mm socket. Remove six (6) bolts and washers. Keep bolts and washers to reattach back panel later.

5.Remove all contents from inside stove cavity. Contents include:

(1) - Stove bottom

(4)- Legs with leg leveler bolts

(1)- Bottom door

(1)- Top grate

(1)- Hardware kit bag with fasteners

Bolt	Product
Back	Identification
	Label
Stove
Panel

remove bolts.

Pallet

BoltFront Wood

Pallet Wood	Bottom Of
	Stove Unit

Figure 8 - Removing Pallet Wood From The Bottom of The Stove

		Door Catch Bolt
	Door Hinge Step	With Adjustable
	Bolt Hole	Hex Nuts Hole
Leg			Leg
	Front
Hole			Hole

Stove

Bottom

Hole

Leg Hole

Bottom Of

Stove Unit

Figure 9 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment

Figure 6 - Removing Back Panel
Top of Stove Unit
Front of		Front of
		Stove Unit	Top of
Stove
			Stove
Unit
	Pallet		Unit
Drop
	Wood
Cloth/	Bolted to
Blanket	Bottom of
	Stove
	Body
Figure 7 - Laying Down Stove On Side			Continued

105499 5