Vantec EZ-Swap2 Removable Hard Drive Rack Serial ATA to Serial ATA manual Using the Mobile Rack

3-3 Using the Mobile Rack

WARNING

•DO NOT remove the drive case while the drive is working. Damage to data may result.

•The Key-Lock must be in the Lock position while in use.

To insert the Mobile Rack drive case:

1.Insert the Mobile Rack drive case (with drive installed) into the installed Mobile Rack docking case and push firmly until the drive is seated.

2.Insert the key and turn it right to lock. The LED on the Mobile Rack should light after a slight delay. The installed Mobile Rack device is ready to use.

Key-Lock in

Lock Position

To remove the Mobile Rack drive case:

1.Insert the key and turn it left to unlock. Note that the power LED on the Mobile Rack should now be OFF.

2.Gently pull on the Mobile Rack handle to slide the drive case out.

Key-Lock in

Unlock Position

Aluminum Mobile Rack 3-9