![](/images/new-backgrounds/1202436/20243629x1.webp)
directions below.
1.Setup the RAID Array prior to Windows installation.
2.Follow Microsoft’s Windows installation procedure.
3.At the Windows Setup screen, press F6 to install the driver.
4.When prompted, press S to specify the location of the driver.
5.Insert the floppy disk, then press Enter.
6.Select (Windows XP/2003 x64) RAID/AHCI Driver for JMicron JMB36X Controller, then press Enter.
7.Press Enter to finish driver installation, then follow the
For An Existing Installation
1.Setup the RAID Array prior to driver installation and boot up to Windows.
2.Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA
3.At the Windows desktop, click Start, then Run.
4.Type
5.Follow the
Page 15 |