Vantec UGT-IS100R user manual For Windows Vista

installation.

6.Restart Windows to complete the installation.

For Windows® Vista

For A New Installation

A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the “UGT-IS100R\2000_XP_2003_Vista\Floppy32” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.At the Windows Setup screen, press Load Driver to install the driver.

4.Insert the floppy disk, please select JMicron JMB36X Controller (A:\jRAID_f.inf), then press Next. (Change A:\ to match your floppy drive letter)

5.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

UGT-IS100R Page 16