Vantec UGT-IS100R user manual CON3

		CON3
J5-J8	1-2 close	Enable	SATA	Port
		CON2
	2-3 close	Enable	SATA	Port
		CON4

Hardware Installation

1.Turn Off the power to your computer.

2.Unplug the power cord and remove your computer’s cover.

3.Remove the slot bracket from an available PCI-E slot.

4.To install the bard, carefully align the card’s bus connector with the selected PCI-E slot on the motherboard. Push the board down firmly.

5.Attach your internal or external devices to the 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier .

6.Replace the slot bracket’s holding screw to secure the card.

7.Replace the computer cover and reconnect the power cord.

UGT-IS100R Page 6