exit the BIOS.
RAID 0+1 (Striping + Mirroring)
1.As the BIOS boots press Ctrl+J when prompted to enter the
RAID BIOS.
2.At the next screen select Create RAID Disk Drive, press Enter.
3.Enter RAID name, press Enter.
4.Please use arrow keys ↑ and ↓to switch the RAID level to
5.Please use arrow keys ↑ and ↓ to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K, then press Enter.
6.Input the RAID size, press Enter.
7.When asked Created RAID on the select HDD (Y/N)?, press Y to accept.
8.At the next screen select Save And Exit Setup, press Enter. When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.
Page 10 |
