Vantec UGT-IS100R user manual For Windows Server 2008/7 64-bit

into your CD-ROM Drive.

3.At the Windows desktop, click Start, then Run.

4.Type D:\UGT-IS100R\2000_XP_2003_Vista\setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

5.Follow the on-screen instructions to complete the installation.

6.Restart Windows to complete the installation.

For Windows® Server 2008/7 (64-bit)

For New Installation

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.At the Windows Setup screen, press Load Driver to install the RAID driver.

4.Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier into your CD-ROM Drive, click Browse.

5.Click on the Plus (+) sign next to the CD-ROM Drive, double click the “UGT-IS100R\XP_2003_Vista\Floppy64” folder, then click OK.

6.Select JMicron JMB36X Controller, then press Next.

UGT-IS100R Page 20