Vantec UGT-IS100R user manual To Verify Driver Installation

7.Follow the on-screen instructions to complete the installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier into your CD-ROM Drive.

3.At the Windows desktop, click Start, then Run.

4.Type D:\UGT-IS100R\XP_2003_Vista\setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

5.Follow the on-screen instructions to complete the installation.

6.Restart Windows to complete the installation.

To Verify Driver Installation

1.Right click My Computer and click Manage.

2.Select Device Manager.

3.Look for the following:

Windows® 2000/XP/2003: Double click SCSI and RAID

UGT-IS100R Page 21