Bulb & Diffuser installation
1.Insert bulb into lamp by firmly holding bulb base and push into the socket (See below)
Note: Make sure bulb is fully inserted into the socket. The bottom of the bulb base should touch the plastic housing of the lamp.
2.Attach the plastic diffuser to the lamp body by first inserting the tab located at the bottom of the diffuser (A) into the opening of the lamp base (B).
3.Rotate the plastic diffuser and align the side snap tabs (C) into position – press firmly to snap parts together.
C
A
B
4.Plug lamp into a standard
Note: please allow a few minutes for the bulb to warm up to full illumination.
Note: if bulb does not illuminate instantly, please refer to the troubleshooting section of this manual.
6
