Verizon MBR1515L manual LED descriptions

Verizon 4G LTE Router MBR1515LVW

Table 1 describes each LED and button on the front panel of the router.

Table 1. LED descriptions

LED	Activity	Description
WPS	Press the WPS button to open a 2-minute window for the router to connect with other
	WPS-enabled devices. For more information about this function, see Use Push 'N' Connect
	(WPS) to Configure Your Wireless Network on page 36.
Wi-Fi	This button can be used to control the Wi-Fi radio or both the Wi-Fi radio and mobile
	broadband radio. Use the router interface to select the options. The default is set for Wi-Fi
	radio only.
Power	Solid green	The router is turned on and operating normally.
	Solid amber	POST (power-on self-test) is in progress.
	Off	Power is not supplied to the router.
Internet Port	Solid green	An Internet connection is established.
	Solid amber	Traffic meter limit has been reached; traffic is blocked.
	Blinking green	Data is being transmitted over the Internet connection.
	Blinking amber	Traffic meter limit has been reached, but traffic is not blocked.
	Blinking green and amber	Failover from WAN to mobile broadband occurred.
	Off	No Internet connection is detected.
Wi-Fi	Solid blue	The Wi-Fi local port is initialized.
	Blinking blue	Data is being transmitted or received over the Wi-Fi link.
	Off	The wireless access point is turned off.
LAN Ports	Solid green	The local Ethernet ports have detected wired links with computers.
	Blinking	Data is being transmitted or received.
	Off	No link is detected on these ports.
WAN Port	Solid green	The Ethernet WAN port has detected an active link.
	Blinking	Data is being transmitted or received.
	Off	No link is detected on these ports.
4G LTE	Solid blue	The router is in 4G LTE coverage.
	Off	No coverage is detected.

Basic Setup and Traffic Meter

13