Vermont Casting 2550 Encore Clearance Chart, Unprotected Surfaces, Protected Surfaces, 2000956

Encore Woodburning Stove

Encore Clearance Chart

For use with either 6” or 8” flue collar/chimney connection

	Unprotected Surfaces			Protected Surfaces
			Stove Clearance
	Stove Installed		Stove	Stove Installed			Stove
	Parallel to Corner		in Corner	Parallel to Wall			in Corner
	Side	Rear	Corners	Side		Rear	Corners
No stove heat shields	(A) 24”	(B) 31”	(C) 24”	(D) 8”		(E) 15”	(F) 8”
	(610 mm)	(787 mm)	(610 mm)	(203 mm)		(380 mm)	(203 mm)
Top Exit, rear stove h.s.,	(G) 24”	(H) 19”	(I) 17”	(J) 8”		(K) 11”	(L) 7”
single-wall chimney con-	(610 mm)	(483 mm)	(432 mm)	(203 mm)		(280 mm)	(178 mm)
nector heat shields1
Rear Exit, rear stove	(M) 24”	(N) 19”	N/A	(P) 8”		(Q) 11”	N/A
heat shield only	(610 mm)	(483 mm)		(203 mm)		(280 mm)
Top Exit, rear stove h.s.,	(G) 24”	(H) 19”	(I) 24”
double-wall chimney	(610 mm)	(483 mm)	(610 mm)			*
connector3
		Chimney Connector Clearance
Single-wall connector,	24”	(610 mm)			8”	(203 mm)
No chimney connector
heat shields
Single-wall connector,	12”	(305 mm)			4”	(102 mm)2
Chimney connector heat
shields installed
Double-wall connector3	12”	(305 mm)				*
		Clearance to Combustibles in Front of Stove
		All Installations		(S) 48” (1219 mm)

* Clearances with double-wall connectors and protected surfaces have not been tested for the Encore.

1.A ceiling heat shield, 24” (610 mm) in diameter and suspended 1” (25 mm) from the ceiling, must surround the chimney connector in installations in which the chimney connector penetrates the ceiling. The chimney connector shield extends only to 28” (710 mm) above the flue collar.

2.The ceiling heat shield required when the chimney connector shields are used should meet the wall protector. This will require trimming the ceiling shield along the line of intersection with the wall protector.

3.In top-exit installations, this clearance requires the use of a rear stove heat shield with the flue collar insert installed.

14 2000956