Vermont Casting H33BDVRRNP Operating Instructions, Glass Information, Louvre Removal, 10004798

Models: H33BDVRRN H33BDVRRNP

1 32
Download 32 pages 30.63 Kb
Page 20
Image 20
Operating Instructions

Pyromaster© H33BDVRRN/P

Operating Instructions

Glass Information

Only glass approved by the CFM Corporation should be used on this fireplace.

The use of any non-approved replacement glass will void all product warranties.

Care must be taken to avoid breakage of the glass.

Under no circumstances should this appliance be operated without the window frame assembly in place, or with the glass in a damaged condition.

Replacement glass (complete with gasket) is available through your CFM Harris dealer and should only be installed by a licensed qualified service person.

Louvre Removal

Lower

Window

Clamps

 

Frame

 

Assembly

Window

 

Frame

 

Assembly

 

 

Pull Clamp

 

Hook

 

Push Clamp

 

Handle

 

FP771b

Fig. 36 Window frame assembly removal.

Glass Cleaning

The top louvre panel is removed by lifting the panel vertically and pulling it away from the appliance. (Fig. 35) The lower access door is hinged along the bottom edge and is folded down to allow access.

2.Glass Information

Louvre

1.

Glass Panel

FP1221

Fig. 35 Remove top louvre panel.

It is necessary to periodically clean glass. During start- up condensation, which is normal, forms on the inside of the glass. This condensation causes lint, dust and other airborne particles to cling to glass surface.

Also initial paint curing may deposit a slight film on the glass. It is therefore recommended the glass be cleaned two or three times with a non-ammonia based household cleaner and warm water (We recommend gas fireplace glass cleaner) within the first few weeks of operation.

After the initial cleaning process the glass should be cleaned two or three times during each operating

Window Frame Assembly Removal

1.Turn the fireplace OFF (including the pilot).

2.If the unit has been operating allow time for the components to cool.

3.Remove the top louvre assembly.

4.Open the lower louvre panel.

5.Release the two clamps securing the lower edge of the window frame assembly by pulling down on the handles. (Fig. 36)

6.Tilt the window frame assembly out slightly at the bottom, lift the window frame assembly up and away from the fireplace.

7.To replace the window frame assembly reverse the procedure.

season depending on the environment in the house.

Clean the glass after the first two weeks of operation.

Installation of Logs,

Lava Rock & Ember Material

Unpack the logs from packaging and remove each log from its wrapping materials.

The logs are fragile and should be handled with care. Keep the packaging material out of the reach of children and dispose of the material in a safe manner.

The individual logs can be easily identified by the numbers cast on the underside of each log.

20

10004798

Page 20
Image 20
Vermont Casting H33BDVRRNP manual Operating Instructions, Glass Information, Louvre Removal, Glass Cleaning, 10004798