Vermont Casting NV580, NV360 Remote Controls, Ceramic Refractory Lining, Decorative Frame Trims

Remote Controls

Optional remote control units are available to control different functions of the appliance.

Model	Functions Controlled
RC1	ON/OFF
RC2	ON/OFF and Temperature
MRC3	ON/OFF and Temperature control with
	a digital display and a programmable
	24 hour clock
IMT	Wall mounted thermostat control

Ceramic Refractory Lining

1.Remove glass and logs.

2.Insert supports under ceramic hearth panels. (Fig. 35)

3.Remove three (3) screws securing heat shield to combustion dome. (Fig. 36)

4.Place rear ceramic panel in back of unit. (Fig. 37)

5.Place side panels.

6.Replace heat shield, logs and glass.

Grate Ceramic

Support

Burner

	Hearth Panel	H101a
Fig. 35	Ceramic support.
	Section A
Heat Shield		Heat Shield
		(3)
		Screws
		Side View
		Section A
		H103
Fig. 36	Heat shield.

NV360/580 Series

	Rear Ceramic Panel
	Back of
	Firebox
Burner
	Rear Log
	Support
	H102
Fig. 37	Rear ceramic panel placement.

Decorative Frame Trims

A selection of decorative frame trim kits are available for moutning around the outside of the appliance to enhance its visual effct on the room. Installation instru- citons for each decorative frame trim are included with the frame trim kit. Contact your authorized distributor for details and ordering information.

B-Vent Adapter

For use with other than VCMP B-vent (SK-8) pipe. Con- tact your dealer for information.

Outside Air Kit

The model AK-1 Outside Air Kit is designed to bring additional combustion air directly from the outside to the fireplace. Refer to installation instructions provided with the Outside Air Kit.

20003565 25