For Your Safety Read Before Lighting

WARNING: If you do not follow these directions exactly, a fire or explosion may result causing property damage, personal injury, or loss of life.

What To Do If You Smell Gas

•Do not try to light any appliance

•Do not touch any electrical switch, do not use any phone in your build- ing

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

•If you cannot reach your gas supplier, call the fire department

Before operating, smell all around the appliance area for gas odor. Be sure to smell near the floor because some gases (propane) are heavier than air and will “pool” on the floor.

Use only your hand to push or turn the gas control dial. NEVER USE TOOLS. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified technician. Force or attempted repair may result in a fire or explosion.

Lighting the Pilot

The pilot will resist lighting on new installa- tions due to air in the gas supply line. It may take several minutes to bleed air completely out of the gas plumbing system through the pilot line.

This appliance has a pilot which is lit by a spark ignition device (piezo). If the piezo fails, then light the pilot using matches following the Match Light- ing instructions below.

1.STOP! Read the safety information above.

2.Push in gas control knob slightly and turn clock-

wise to “OFF”.

3.NOTE: Knob cannot be turned from “PILOT” to “OFF” unless knob is pushed in slightly. Do not force.

4.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow the safety information above. If you don’t smell gas, go on to the next step.

5.Turn the control knob counterclockwise to “PILOT” and push in. Continue to hold the con- trol knob in and push the piezo igniter button in until the pilot lights.

6.Continue to hold the control knob in for about one (1) minute after the pilot is lit. Release the knob and it will pop back up. Pilot should re- main lit. If it goes out, repeat steps 3 and 4.

7.If the knob does not pop out when released, stop and call your service technician or gas supplier. If the pilot will not stay lit after several tries, turn the gas control knob to “OFF’ and call your service technician or gas supplier.

8.Turn gas control knob counterclockwise to “ON”. CAUTION: Be sure ON/OFF/RS switch is in the off (middle) position. Also, the GWSK should be in the “OFF” position and/or the remote should be in the “OFF” position before turning the control knob “ON”. If pilot goes out, repeat steps 4 and 5.

9.Turn ON/OFF/RS switch to “ON” or remote po- sition. Turn remote switch to “ON”.

10.Flame is adjustable by rotating the “HI/LO” knob.

3311857

11

Page 10 Page 12
Page 11
Image 11
Vermont Casting SA30SKHRN, SA24SKHRN For Your Safety Read Before Lighting, Lighting the Pilot, What To Do If You Smell Gas
Page 10 Page 12

SA30SKHRN, SA24SHKRP, SA18SHKRN, SA30SKHRP, SA24SKHRN specifications

Vermont Castings is renowned for its high-quality stoves and fireplaces, and its models SA18SHKRP, SA24SHKRP, SA30SKHRN, SA24SKHRN, and SA18SHKRN are no exception. These stoves are designed to deliver efficient heating while accentuating the beauty of any room.

The SA18SHKRP and SA24SHKRP are notable for their sleek designs and exceptional heat output. The SA18SHKRP is a compact option, making it ideal for smaller spaces. Its wood-burning capability provides a warm ambiance while being remarkably efficient, using advanced combustion technology to ensure minimal smoke emissions. The stove also features a built-in air wash system that keeps the glass door clean, allowing for an unobstructed view of the flames.

On the other hand, the SA24SHKRP is slightly larger, making it suitable for medium-sized areas. The enhanced capacity allows it to burn longer and produce more heat, which is perfect for those chilly evenings. This model utilizes Vermont Castings’ renowned catalytic combustion system, enhancing its efficiency and reducing the need for excessive fuel consumption.

The SA30SKHRN is the high-capacity option designed for larger spaces or those seeking to heat multiple rooms. With an impressive firebox size, it ensures a longer burn time and a consistent heat output. It also incorporates Vermont Castings’ cutting-edge technology for clean burning. This model boasts a contemporary aesthetic, making it a striking addition to any modern setting.

Similarly, the SA24SKHRN and SA18SHKRN models cater to users seeking flexibility in heat management. Both stoves are designed to deliver efficient performance while being environmentally friendly. The SA24SKHRN offers a balance between size and heat output, making it a versatile choice for various living spaces. In contrast, the SA18SHKRN is geared towards those who need a compact but powerful heating solution.

All models come equipped with Vermont Castings’ precision engineering and craftsmanship, ensuring longevity and reliability. The durable construction is complemented by an array of customizable finish options, allowing homeowners to choose a design that fits their decor.

In summary, Vermont Castings’ SA series, including the SA18SHKRP, SA24SHKRP, SA30SKHRN, SA24SKHRN, and SA18SHKRN, combines efficiency with elegant design. Each model employs advanced technologies to ensure optimal performance while being mindful of the environment.
Top Page Image Contents