FT-60R OPERATING MANUAL50
H. Repeat the previous steps until you have completed the ac-
cess code (“#123”).
I. Press and hold in the [F/W] key for one second to save the
setting.
2. Press the PTT switch to save the setting and exit to normal operation.
3. Press the [F/W] key, then press the [0( )SET] key to enter the Set mode again.
4. Rotate the DIAL knob to select Set Mode Item 21: I NET.
5. Press the [F/W] key to enable adjustment of this Set Mode Item.
6. Rotate the DIAL knob to set this Set Mode Item to “INT.MEM”
(thus activating the “Other Internet Link System” mode).
7. Press the PTT switch to save the new settings.
8. Press the [0( )SET] key momentarily to activate the Internet
Connection feature. The “ ” icon will appear in the upper right
corner of the display.
9 Press and hold in the [0( )SET] key for one second, rotate the
DIAL knob to select the DTMF access number (“IMEM 1” ~ “IMEM 9”) correspond-
ing to the Internet link repeater to which you wish to establish
an Internet link, then press the PTT switch momentarily to lock
in the selected access number.
10. Once the Internet Connection feature is activated per step 8
above, you may now press the [0( )SET] key, while you are
transmitting, to send out the selected DTMF string (to establish
the link to the desired Internet-link mode).
11. To return to the WIRES™ mode, repeat steps 3 - 6 above, selecting “INT.COD” in step
6.
INTERNET CONNECTION FEATURE