FT-60R OPERATING MANUAL 67
SET (MENU) MODE
FUNCTION
Selects the alarm(s) utilized when the Emergency function is
engaged.
Selects the Internet Link Connection mode.
Selects the Access Number (DTMF digit) for WIRES™
operation.
Selects the memory register for an Access Number (DTMF
code) for non-WIRES™
Selects the LCD/Keypad Lamp mode.
Selects the Control Locking lockout combination.
Selects the MONI key (just below the PTT switch) function.
Toggles the display indication between “frequency” and the
channel’s “Alpha/Numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory channels.
Enables/disables the Enhanced CTCSS Paging & Code
Squelch function.
Enables/disables the Answer Back function of the Enhanced
CTCSS Paging & Code Squelch.
Setting the Receiver Pager Code for the Enhanced CTCSS
Paging & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced CTCSS
Paging & Code Squelch.
Enables/disables the Password feature.
Stores the password.
Selects the Scan Resume mode.
Selects the function of the [HM/RV] key.
Adjusts the RF Squelch threshold level.
Sets the Repeater Shift Direction.
Enables/disables the Priority Revert feature.
Selects the receiving mode.
Selects the Receive-mode Battery Saver interval (“sleep” ratio)
Selects the Smart Search Sweep mode.
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan lamp while paused.
Sets the magnitude of the repeater Shift.
Selects the Memory Scan “Skip” channel-selection mode.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the synthesizer steps.
Setting of the CTCSS Tone Frequency.
Setting of the TOT time.
Enables/Disables the TX LED while the radio is transmitting.
Enables/Disables the Transmitter Battery Saver.
Enables or disables the VFO band edge limiting for the current
band.
Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Enables/Disables the Weather Alert Scan feature.
AVAILABLE VALUES
(DEFAULT: BOLD ITARIC)
EMG.BEP / EMG.LMP /
EMG.B+L / EMG.CWT /
EMG.C+B / EMG.C+L /
EMG.ALL / OFF
INT.OFF / INT.COD / INT.MEM
CODE 0 - CODE 9
(CODE 1)
d1 - d9
KEY / 5SEC / TOGGLE
LK KEY / LKDIAL / LK K+D /
LK PTT / LK P+K /
LK P+D / LK ALL
MONI / T-CALL
FREQ / ALPHA
---
OFF / ON
ABK.OFF / ABK. ON
(05_47)
(05_47)
PWD.OFF / PWD. ON
---
BUSY / HOLD / TIME
<
REV
>
/
<
HOME
>
S-1 / S-2 / S-3 / S-4 / S-5 / S-
6 / S-8 / S-FULL / OFF
RPT.OFF / RPT./ RPT. + ()
RVT.OFF / RVT. ON
AUTO / FM / AM
200 MS / 300 MS /
500 MS / 1 S / 2 S / OFF
SINGLE / CONT
ONLY / MEM
ON / OFF
0.00 - 99.95 MHz ()
OFF / SKIP / ONLY
SPL.OFF / SPL. ON
OFF / TONE / TSQL /
REV TN / DCS
5 / 10 / 12.5 / 15 / 20 / 25 / 50
/ 100 kHz, or AUTO
50 CTCSS tones (100 Hz)
1MIN - 30MIN or OFF (6MIN)
LED. ON / LED.OFF
SAV.OFF / SAV. ON
BAND / ALL
WIDE / NARROW
ALT.OFF / ALT. ON
SET MODE ITEM
20 [EMG S]
21 [I NET]
22 [INT CD]
23 [INT MR]
24 [LAMP]
25 [LOCK]
26 [M/T-CL]
27 [NAME]
28 [NM WRT]
29 [PAGER]
30 [PAG.ABK]
31 [PAG.CDR]
32 [PAG.CDT]
33 [PSWD]
34 [PSWD W]
35 [RESUME]
36 [REV/HM]
37 [RF SQL]
38 [RPT.MOD]
39 [PRI.RVT]
40 [RX MOD]
41 [RXSAVE]
42 [S SRCH]
43 [SCN MD]
44 [SCN.LMP]
45 [SHIFT]
46 [SKIP]
47 [SPLIT]
48 [SQL.TYP]
49 [STEP]
50 [TN FRQ]
51 [TOT]
52 [TX.LED]
53 [TXSAVE]
54 [VFO.BND]
55 [WID.NAR]
56 [WX ALT]
: Depends on the transceiver version.