Vertical Communications DX-80TM manual Pswd, Allow/Deny, Paging Deny, Paging Accept

password). The attendant extension can set the system mode of operation using the Evening Mode code or a feature button programmed with the code for simple one-button operation.

Operation – Change Service Mode

1.At the attendant extension:

1.1.Press the button programmed with the Service Mode feature code.

Or enter the feature code…

1.2. Press !63.

PSWD :_

1.3. Input the attendant extension password.

2.The Service Mode is advanced to the next mode.

3.Repeat until the appropriate mode of service displays.

Page Allow/Deny !/9

You can block one-way page announcements at your extension by dialing the Page Deny code. The Page Allow/Deny feature does not affect enabled Background Music.

Operation – Setup

1.When the extension is idle, press !/9.

PAGING DENY

2.Press !/9 again to enable page announcements at your extension.

PAGING ACCEPT

Pause/Pause Insertion

Pause Insertion is used to generate an intentional delay in dialing on outgoing outside line calls. You can store a pause or a combination of pauses in the Speed Dial bins to allow timed access to special services while allowing you to monitor the progress of the call.

A pause will appear as “P” on the display.

Operation

When storing numbers in speed dial, use the feature code !70 to insert a pause.

Page 48 P7292 DETUG 09/01