Introduction
1.2 Making the Connections
The connectors for attaching your EP300 to the network are located on the underside of the instrument. Here you will also find con- nectors for attaching the power supply and an optional headset. You can also connect a cable from the EP300 to your PC so that both devices can operate with a single network cable. The following diagram shows the cable connection locations.
To PC
To LAN
To Headset
To Handset
connection
Power
Caution: Do not connect this jack directly to a central office line.
Note: Some types of network equipment can provide the power for the EP300 instrument through its Ethernet connection. In those instances, the external power supply is not required.
12 | Comdial | May ‘04 |
