CONVERSip EP300 User
To adjust the pedestal, perform the following tasks.
1.Grasp the rear of the pedestal base firmly with one hand and lift the rear portion of the EP300 upward with your other hand.
2.Lift the EP300 upward with one hand and raise the EP300 supporting arms upward with your other hand. Notice there are
three sets of notches under the EP300 corresponding to the three positions available.
3.When the EP300 is at the desired height, select the closest pair of notches and insert the supporting arms in the notches. Press down slightly on the EP300 until you feel the supporting arms snap into place.
Also remember, as with any piece of electronic equipment, your EP300 may be damaged by contact with liquids. So please try to place the EP300 in an area that is free from the danger of spills.
May ‘04 | Comdial | 11 |
