Vertical Communications MP5000 manual Dial Back Clear, Making a Call to an Outside Party

Making Calls

1120

DIAL BACK CLEAR

3.Press the DIAL/ANSWER button or the DIAL soft key.

4.The system begins placing your call. You can cancel the call before it is answered by pressing the CLEAR soft key.

5.The system rings the called extension (if idle), or plays a busy signal (if busy). If you dialed an invalid number, the system plays an audible tone indicating that the number you dialed is invalid.

6.When the called party answers, begin speaking.

7.When the call is complete, hang up the handset (or press the SPEAKER button if using the speakerphone).

2.2Making a Call to an Outside Party

You can dial outside parties by including the outside line access code before dialing the number (95545000, where 9 is the access code), or by first selecting the outgoing line if you have direct access from a pre-programmed button. The default access code for outside lines is 9.

To dial an external number, perform the following steps.

1.Lift the handset, or press the SPEAKER button. The system plays the dial tone.

2.Dial the number, preceded by the line access code. If you make a mistake, press the BACK soft key or CLEAR soft key to re-enter the digits.

20 Comdial May ‘04