Vidikron 60 manual » Connector Panel, Input Terminal, RGB1, DVI RGB3

CONTROLS AND FEATURES

»Connector Panel

1 2 3

4 5 6 7 8 9

1. Input Terminal

This is an input terminal for component signals (Y, CB, CR) or DTV-format (Y, PB, PR) signals. Devices which have component signal output terminals can be connected. This terminal can also be used as multipurpose video input terminals that allow input of the following signals: analog RGB signals, vertical sync (V) signals, and horizontal sync (H) signals/ composite signals (Cs). Devices which have analog RGB signals output terminals can be connected.

To use this terminal, the “RGB2(BNC)” item in the “Options” menu must be set correctly according to the input signals.

•Input of external sync signals is automatically detected. Detection of H/V signals or Cs signals causes automatic switching to external sync. The priority order is H/V>Cs.

•When computer signals are input, the uppermost edge of the image may appear to bow if the sync signal input is a composite sync (Cs) or G on sync signal. In this case, use separate sync signals for vertical sync (V) and horizontal sync (H).

2. RGB1

This is an input terminal dedicated to computer signals (RGB Video signals and sync signals). Connect the display output terminal of the computer to this terminal. When a Macintosh computer is to be connected, use the conversion adapter (sold separately) for Mac.

•When computer signals are input, the uppermost edge of the image may appear to bow if the sync signal input is a composite sync (Cs) or G on sync signal. In this case, please use separate sync signals for vertical sync (V) and horizontal sync (H).

3. DVI (RGB3)

HDCP compatible video signals (480p, 720p 60/59 Hz, 1080i 60/59 Hz) and input terminal for personal computer (RGB) signal. Connect the display output terminal of the computer to this terminal.

• The menu screen for HDCP compatible signal input is the same as when RGB input is selected.

4. SCREEN TRIGGER

The signal output for controlling the roll-up screen that supports [SCREEN TRIGGER]. Outputs DC 12V/max. 100 mA when power is on.

11